The Hamilton Parking Entry/Exit Terminal (PEET) is the primary device in a self park installation. The purpose of this device is to allow your customers to enter your lot by pulling a ticket or by scanning a credential. A credential can be an employee badge, a loyalty card, a reservation or a parking pass. Before you begin setting up your PEET device, you’ll need to have a few things:
Lane number – This is defined within netPark on the Self Park screen and is typically setup by netPark
Facility Code – If using RFID Prox reference the facility code on the cards from your provider
NIM IP – Provided by the IT team at your location to netPark. Once we have configured and shipped the NIM we can provide this IP upon request.
Router/Gateway IP – Provided by the IT team at your location
Subnet mask – Provided by the IT team at your location
Controller IP – Provided by the IT team at your location (should be unique for each device)
Please note: The NIM IP, Gateway IP, Subnet Mask and Controller IP should all be provided by your IT team. netPark does not run or manage networks and cannot provide these details.
Setup device in netPark
The first step in configuring a PEET device is to get setup all devices in netPark. This allows us to clearly id each device and makes it easier to manage the lot. To begin, navigate to the Self Park screen in netPark and click the “Add New” button. A window will popup with some questions about the device you are configuring. With this being a PEET device you’ll want to select “Hamilton Entry PEET-S” or “Hamilton Validator PEET-V”. Provide a clear description of the device (e.g. Cashier Booth Left Entry). Note: The Lane Number specified here is what we will use when configuring the PEET. The lane number is the first digit of any ticket pulled from a PEET device. For example, if your lane number is “3”, tickets from the Hamilton device will be 3,000,000-3,999,999.Program PEET with HandheldUnlock PEET using wrench
Configuring the PEET
Configuring a PEET is pretty straight-forward. To begin, you’ll need to connect your Hamilton Programming Device to the controller inside the PEET. Once you have connected your programming device, hit the “ESC” key to bring up the main menu.
Configuring Network Settings
Via the Main Menu, press F1 to access the NETWORK section and follow the below steps:
Navigate to LAN
DHCP* – Set to “Disabled”
Controller IP Addr – Set IP Address of PEET device
Edit Gateway Addr – Set Gateway IP Address
Edit DNS Addr – Set DNS Address (if needed)
Edit Network Mask – Set Subnet Mask IP Address (typically 255.255.255.0)
Navigate to NIM IP and set to NIM’s IP Address
Configuring Device Settings
Via the Main Menu, press F2 to access the CONFIGURE section and follow the below steps:
Navigate to Kiosk
Lane Number – Set Lane Number (should match lane number in netPark)
Ticket Number – For a new device, set this to 0. If you are reconfiguring an existing device this should be set to the last issued ticket number for this lane
Date & Time – Set the “Timezone” option to the timezone of the location
Navigate to H/W Options
Barcode – Enable to accept barcodes
Keycard
Set Keycard – Set to enabled if using RFID cards
HID Configuration
Set Facility Code – Set to the facility ID on the prox cards, if you do not know or are using multiple types of cards, set to 0
Button – Set to enabled to issue tickets
Navigate to Loop Options
Set Loop Mode – Set the loop mode of the device to one of the following:
1-Loop Presence – Event is complete when the device loop turns on and off
1-Loop Safety – Event is complete when the gate loop turns on and off
2-Loops Far – Event is complete when the device and gate loops turn on and off with a small delay between each
2-Loops Close – Event is complete when the device and gate loops turn on and off with no delay between each (DEFAULT)
* We recommend disabling DHCP to make it easier to troubleshoot devices. A static IP address is not necessary.
Finalizing Configuration
In all configuration cases, a reboot of the PEET device is recommended.
Carrida Plate-i ALPR Camera Configuration Camera Information The CARRIDA Plate-i ALPR Camera is an affordable, standalone solution for automatic license plate recognition (ALPR), designed to support credentialed entry and audit applications. Equipped with a 4K Sony image sensor and on-sensor ALPR decoding, it ensures fast and efficient license plate recognition directly on the camera. With plug-and-play capability and PoE+ support for both power and data, it’s easy to integrate into existing systems. Built to withstand harsh environments, the camera boasts an IP66 (IK10) waterproof rating and offers a manual zoom range from 1 to 7 meters (3 feet to 23 feet) for versatile installation. Technical…
Website Modules - Google Analytics netPark offers deep integration with Google Analytics and Bing Universal Event Tracker. In addition to the general Analytics you can get when you include Google Analytics or Bing Universal Event Tracker you can also get the following details:Shortcodes for clicks and impressions throughout your sitePromo impressions and click-throughsGoogle Conversion Code and UET conversion integrationGoogle Analytics Enhanced E-Commerce:Tracking of quoted datesImpressions of each quote and the amountsImpressions of each service and the amountsQuote/Service Clicks (selections) and Checkouts (purchases)Unique PurchasesProduct RevenueProduct Refunds (canceled reservations)Breakdown on a per-reservation basis of costs and purchases Google Analytics Setup You'll need to have already signed up…
BOCA Thermal Ticket Printer The BOCA Lemur is a small form-factor thermal ticket printer used for on-demand ticket printing and UVG printing within the netPark system. About Print Method: direct thermalPrint Speed: 10’’ per sec. maximumResolution: 203 dpi (8 dots/mm); 305 dpi (12 dots/mm); 600 dpi (premium upgrade)Size: 7.7 H x 7.3 W x 8.5 LWeight: 9.5 pounds BOCA Thermal Ticket Printer Installation Driver Installation Please follow the steps below to install the BOCA Printer Driver on your PC: Follow the link to download the Printer Driver Zip file: Boca_Systems.zip On most PCs, the file will be downloaded to the "Downloads" folder on your PC;…
How To Maintain Stalls Maintaining Stalls inside of netPark is an easy and hassle-free process that allows you to assign stalls to customers to keep them parking at the same spot over and over again. Our Stall feature is built to be integrated with our recurring system so that you can ensure a recurring customer always has a spot. Using our Stall feature will allow you to be able to see when a recurring parker is on the lot when they are off the lot, and when you have available spacing directly from our Stall Maintenance screen or on the Dashboard using our Stall…
How to Configure & Use the eSignature Module The eSignature Module is an optional enhancement to the Recurring Customer Module, designed to streamline recurring contract management. With this feature, clients can generate contracts for recurring services and provide them to their customers for digital signatures directly through Customer Loyalty Module on the client's website. All signed contracts are securely stored within netPark, allowing for easy retrieval at any time for record-keeping purposes. The system also tracks contract versions, storing them based on the last edit date. Additionally, customers can be automatically notified when a new version of the contract is created, helping to ensure they stay in compliance…
Contact us!
Phone Hours (833) 638-7275 Monday – Friday: 10AM to 6PM EST Emergency Support – 24/7 for business critical functions
Contact Us Please use this form to contact us with any non-emergency comments, problems or inquiries. Be sure to provide details. If this is an emergency or requires immediate assistance, please call netPark Emergency Support.